Moly-Fusion™ GUN Super Size DIY Kit.

Image shows the kit on the left, and the blow up on the right.

For $119.98 this will give you 4 oz. and (1) 1 oz. of the Pure Moly-Fusion™ ($174.90), (1) 4 oz. of MolyFusion Treatment-oil that contains 1/2 oz. of Pure MolyFusion%trade; ($19.98)

This gun-direction specific version of the 4 oz. Engine-Kit Plus will give you 4 oz. of the Pure MolyFusion™ at $119.98 $20.00 off of (4) 1 oz. , a free 1 oz., a 4 oz. Treatment-oil (another 1/2 oz. in it), an 8 mixer bottle like in the engine kit, and also a 1/2 oz. mixer jar. It is $75.00 less than individual value, and on top of that, while the picture is still the most recent kit, the MolyFusion has been increased 33% in concentration so it will be more of a treatment value for guns. We beefed up the pure, because 15mL seems like such a small amount to be treating 4 cylinder engines with - and $19.98 is as much as we want for a 4 cylinder engine kit (slam-dunk word-of-mouth value.)

A long time ago, a $100.00 gun bore-specific kit used to only be 1 oz. of the old Moly-Fusion™ along with 8 oz. of CLP: and 4 oz. of the Treatment-oil contains all by itself is more treatment value with regard to riction reduction then 32 oz. of CLP.

There were many testimonials from happy $100.00 spending (or more) customers because of how much a little bit goes.

The treatment-oil is far more valuable (and unique) than any CLP is (in gun terms, Cleaner, Lubricant, Protectant.)

One advantage of this size kit is you have plenty of extra to mix small amounts in motor oil to treat 2-cycle and 4-cycle engines: from micro-motors to V8's (Ratio is a minimum of 1/2 oz. with oil into a V8, but the 6-8 cylinder engine kit will be 1 ounce, because modern engines have much more metal surface area then the old engines had when 1/2 oz. was enough.) However, for engines, get the engine kit - and for guns, get a gun kit - because even though the Moly-Fusion&trad; is the same, the directions are different. (With guns, specific warnings need to be given as to what not to do with it - and with Automotive it is likewise important not to use it where it shouldn't be used - any application that friction is needed, like in assembling bolts into nuts you don't want the bolts to over-stretch or hose clamps over-tighten or self-loosen, worm-gears not work, etc.

Legal note: All products are licensed under the current license end-user and commercial agreement - left column

t-oil - basically 10 oz. of Treatment-oil for just $19.98 more.

This $100.00 gun bore-specific kit (but now includes other instructions too.) used to only be 1 oz. of the old Moly-Fusion™ along with 8 oz. of CLP. 10 oz. of the Treatment-oil contains all by itself more treatment value then all of the Moly-Fusion™ pure liquid before.

There were many testimonials from happy $100.00 spending (or more) customers because of how much a little bit goes.

The treatment-oil is far more valuable (and unique) to any CLP (in gun terms, Cleaner, Lubricant, Protectant.)

One advantage of this size kit is you have plenty of extra to mix small amounts in motor oil to treat 2-cycle and 4-cycle engines: from micro-motors to V8's (Ratio is a minimum of 1/2 oz. with oil into a V8.)

Legal note: All products are licensed under the current license end-user and commercial agreement - left column

Please check out the page MolyFusion for more information on Moly-Fusion™. Pictures, Instructions, and words will be updated soon.
- October 19, 2005

<< Back to Moly-Fusion™ GUN DIY Kits.