HAND-GUNS

---

Brought to you from Shooter Solutions

The Amazing Moly-Fusion Kits:

Name: Doc Lisenby

Date Submitted: October 28, 1998

Product 

I have tried two products distributed by Shootersolutions; Sweet Shooter and Moly Fusion .
Sweet Shooter is nothing short of miraculous when it comes to preventing rust on several of my firearms. 
The only way I could prevent rust in my hot humid climate, prior to using Sweetshooter was to either clean every spot I touched quickly or keep metal surfaces oiled while shooting. One treatment seems to last for weeks (may be longer,  but I'm apprehensive about trying it).
I apply it everytime I shoot ... and don't get any messy build-up. 
In combination with the other product, ...

I have been shooting in rifle competition for about fifty years and Sweetshooter with Moly-Fusion have been the least expensive single items which have improved accuracy ... 

---

AMT Hardballer, a handgun usage of MolyFusion and Sweetshooter

Sirs,
I just fired a pistol which I'd treated with your fine product. I believe I am very impressed.
It was a short shooting session, intended to work some basic skills with my daughters, but I was able to put a couple of magazines through my treated AMT Hardballer.
The recoil seemed lighter, the cycle time seemed quicker (subjective), and the pistol appeared almost instantly back on target after each shot.
I need to put more rounds through the gun, but as I said earlier, I believe I am impressed. Thank you for a fine product. Peter MSgt --- USMC

6/24/99

Hand-guns Kimbers and other .45's:

---

Jonathan, you are welcome to quote me, using my initials; that will be fine. In answer to your question, the velocity was higher from the first shot on. We did Molyfuse the trigger components, which really smoothed the Kimbers out; now, they're as smooth as my S70 gold cup, which I haven't Molyfused yet; it's the control. After Molyfusing the Kimbers, they do not feel the same as they did before; now they feel really smooth, action-wise. The only place we did not Molyfuse was the chamber, as per the instructions. The weapons work so much better now, we are going to have to get stronger recoil springs. -- T F

Jonathan Doege, I am very happy with the molyfusion and sweetshooter. I wanted to let you know that and share some preliminary test results with you. The test involved 4 .45 ACPs, 1 colt and 3 Kimbers. The ammo was from the same batch of handloads. untreated weapon yielded about 825 fps; 2 weapons MolyFused (2 times) and sweetshootered once averaged 50 fps higher; 1 weapon MolyFused 3 times and sweetshootered 3 times averaged 100 fps higher than the untreated weapon. I say the tests are preliminary because the tests were cut short because the chrony died after being hit with a 230 gr. The sights have been repaired, and the chrony has been replaced. I will do more testing in the near future, and will inform you of the results. Something we found out is this: clean the barrel with powder solvent, then copper solvent, then denatured alcohol, THEN use the MEK, this helps prep the barrel to "wet" better with the molyfusion. Also, using a hair dryer to warm up the inside of the barrel beforemolyfusing helps too. Thanks again for a remarkable product.
             -- T F Stone Creek, OH

Dear Jonathan;

---

Date: 1998/01/22

I had the local S&W authorized gunsmith take-off a few pounds from the trigger pull of my SWV9. Giving the trigger mechanism a Sweetshooter Treatment has smoothed out the pull considerably. I find it every bit as good as the Glock which I like too.

---

I tried Moly Fusion twice after our phone conversation on or about the 25th of June. I did what you told me to do and applied two applications of the Moly Fusion to my pistol barrel. I applied the first coat and something told me I may have done it wrong. 

I waited a good hour or more and then applied the second application. This time I knew went on right (just a feeling) it looked as if the barrel took on a diferent color.

Off to the range I went to test out Moly-Fusion on Sunday 06/28/98. Accuracy seemed to have improved but not that much. I had the feeling that only one treatment of the Moly Fusion had been applied properly. Clean up was somewhat easier but not what you said it would be. I decided then that another application of Moly Fusion was in order. This is how I did it. I ran several clean dry patches throw the barrel with a cleaning rod and jag to heat it up, as you said heat helps the metal ( heat was used on the other two applications as well ). 

I then sprayed one shot of the Moly Fusion into the chamber of the barrel. I used a cleaning rod with a 22 cal. slotted tip and a 22 caliber cleaning patch to paint the inside of the barrel with the Moly Fusion this worked great. Doing it this way, I had control to coat the entire barrel.

Off to the range again on July 05, 1998 to see how Moly Fusion works this time. I know I have treated correctly now. Accuracy has improved greatly. Clean up was half the time I usually spend on the barrel. I'll have to get going and treat the rest of the sweetshooter to see how it will do.
      My over all opinion of Moly Fusion
                  - THE STUFF IS GREAT

Roger p.s. I treated the feed ramp of the pistol with Moly Fusion as well. By the way, all this work was done on a 45cal. model 1911 Kimber.

From: 9/28/98 8:25 PM

---

Jonathan, I've had an opportunity to evaluate "Sweetshooter" and "Moly-Bond" and here are my observations. I had a new Colt Cadet .22LR semi automatic on which the slide never did lock back as it should. After careful inspection it appeared to be a result of excessive friction between the slide and frame. After disassembling the pistol I cleaned all contact surfaces with MEK. I then applied "Moly-Bond following the simple instructions. Before assembly I decided to apply a treatment of "Sweetshooter". This was accomplished according to the included instructions. Then the pistol was reassembled and taken to the range. My intention was to evaluate any improvement in slide function during the chronograph testing and "Sweetshooter" bore treatment. While firing prior to, during, and after, the bore treatment the  slide locked back every time it was supposed to. Using the chronograph made it possible to determine if "Sweetshooter" made any distinguishable differences in the bore. The sequence was to clean the pistol and fire the first chronograph test, clean and treat the bore with "Sweetshooter", shoot the final chronograph test, then clean the pistol again. The ammunition used was Federal .22LR #750. The final results are that the initial slide treatment worked and the slide lock problem is history. The bore treatment resulted in a 11 fps increase in velocity, a 13fps reduction in extreme spread, and 3.5 reduction in standard deviation, all very desirable improvements. During final cleaning the bore exhibited noticeably less fouling and was very easy to clean. At first I was concerned about the price of these items compared to the volume received. This concern was unfounded as the products are quite concentrated and a little goes a long ways, a lot  further than any other product I've tried. They will prove to be a valuable asset for the performance and protection of anyone's firearms. will recommend these products to my students and fellow shooters.



CHRONOGRAPH RESULTS OF ABOVE

SWEETSHOOTER BORE TREATMENT





Before:



After:

Average Velocity: 

1144 fps

1155 fps Extreme Spread: 

72 fps 

59 fps

Standard deviation: 

22.5 fps 19 fps PS, Jonathan, As I get a chance to try the other items I will let you know, Thanks, Bob.

Jonathan, Feel free to quote my comments whereever you wish. The only fouling I experienced after treatment, was slight residue from the burnt powder and primer compound, which was easily cleaned up and the bore sparkled.

Sincerely,

Bob Whitney Handgun Certifications

Above communications edited for spelling: 5/09/97 Note: Bob didn’t realize Moly-Fusion was a treatment for bores also, I think. could be used on the bore before Sweetshooter, at least: It worked, according to data. It is a splendid product in its own right, I think it is quite safe to say, as it can perform so well. -- Jonathan Doege.

---

I have included information from 1997 through 2001 to give you a sense of the years of use and testing our products receive. I realize this is unconventional, (other companies chop out old dates) but we want you to know you get all the truth. Incidentally, customers from

For Latest Long Range Shooting Stuff, check on link in the left column

For the customer use, free 4ml MolyFusion kit offered with conditions today as well as the coupon oct0901fs which gives free domestic ground shipping to all orders over $84.90. The coupon is effective today.

Much more information regarding handguns will be added as soon as they are gathered.

- 10-09-01